Monitor cables

[Richard Billington <Buff@cis.upenn.edu>]

I have the following information:

The connector is manufactured by the Japanese company HIROSE. The cable is
75 ohm coax (for the video) and 4 twisted pairs. The cables have males at
each end. Its made for Symbolics by GORE. There are twelve pins:

				5

		        4               6
                            11     12
                      3                   7

                                10
                        2               8

                             1      9

1:	AUDIO XMIT-
2:	AUDIO XMIT+
3:	SERIAL BIPHASE TXD-
4:	SERIAL BIPHASE TXD+
5:	SERIAL BIPHASE RXD-
6:	SERIAL BIPHASE RXD+
7:	AUDIO CLK OR RCV-
8:	AUDIO CLK OR RCV+
9:	PHASE ENCODED VIDEO
10:	VIDEO GROUND
11:	SERIAL GROUND
12:	GROUND

I would guess this means that the wiring on the cable is straight-through.
This is for the newer (post '83) 36xx. The older machines use a LEMO cable,
and apparently the connectors are no longer available.

That's all I've got.