Re: Updating proms (g206 to ?)

[lawton@AIVAX.RL.AF.MIL (James Lawton)]

I have a 3650 with a configuration as shown below, with an Eagle
connected to it as drive 1.  It works great.

Chassis (P/N 364202, Serial 30108) in Unknown board slot:
    Manufactured on 7/25/86 as rev 1, functions as rev 1, ECO level 0
    FEP Version Number: 206.
NBS Processor (P/N 170393, Serial 799) in Unknown board slot:
    Manufactured on 10/30/86 as rev 1, functions as rev 1, ECO level 0.
2Meg Memory (P/N 170309, Serial 1683) in LBus slot 00:
    Octal Base address: 0
    Manufactured on 2/6/87 as rev 1, functions as rev 1, ECO level 0.
CAD buffer (P/N 170324, Serial 346) in LBus slot 02:
    Octal Base address: 4000000
    Manufactured on 9/15/86 as rev 1, functions as rev 1, ECO level 0.
NBS FEP/IO (P/N 170495, Serial 393) in LBus slot 04:
    Octal Base address: 10000000
    Manufactured on 7/14/86 as rev 1, functions as rev 1, ECO level 0.
SLB Console (P/N 170464, Serial 303) in LBus slot 20:
    Octal Base address: 50000000
    Manufactured on 6/17/86 as rev 1, functions as rev 1, ECO level 0.
NBS FEP/IO SMD Paddle (P/N 170413, Serial 356) in FEP -- PADDLE side:
    Manufactured on 7/21/86 as rev 1, functions as rev 1, ECO level 0.