[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Anyone have any experience with prom 47 in laserwriters??
Received: from R20.UTEXAS.EDU ([10.1.0.62]) by CHIP.UChicago with TCP; Thu 12
Nov 87 00:07:58-CST
Received: from PHOENIX.SCH.Symbolics.COM ([188.8.131.52].#Internet) by
R20.UTEXAS.EDU with TCP; Wed 11 Nov 87 22:17:16-CST
Received: from CHAOS|23314 by PHOENIX.SCH.Symbolics.COM via CHAOS with
CHAOS-MAIL id 17941; Wed 11-Nov-87 15:52:15 PST
Date: Wed, 11 Nov 87 15:53 PST
From: David A. Bentzen <Dave@PHOENIX.SCH.Symbolics.COM>
Subject: Anyone have any experience with prom 47 in laserwriters??
cc: slug@R20.UTEXAS.EDU, Dave@PHOENIX.SCH.Symbolics.COM
ReSent-Date: Wed 11 Nov 87 23:00:37-CST
ReSent-To: SLUG: ;
Date: Tue, 10 Nov 87 08:21 CST
From: Mark Rosenstein <rosenstein@HI.MCC.COM>
We are thinking of upgrading our laserwriters and laserwriter pluses to
all be pluses and run prom set 47. [Recently purchased LW+ may already
have this new set]. We have a LW+ hooked up to a 3600 print spooler.
I take it from your message that you have gotten the laserwriter plus to
work on the 3600?? Was anything special involved with this?? What serial
port is it hung off of?? What version prom does the laserwriter plus
have that is hooked up and working?? Are there any special changes to
the namespace to enable the LW+ to work? Have you had any other little
problems with the printer??
Not desiring to boldly go where no Symbolics has gone before, has anyone
run the new proms?
I would also like to know if you hear from anybody who has been able to make
the new prom set work. (version 47)
P.S. The new prom set is supposed to be faster, especially with bitmaps
(rumor mill says 4-5x faster), with the usual bug fixes. That's all I
Thanks in advance
We've got a LaserWriter+ attached to our Symbolics network, and there
very little that you have to do except drop about $3000 for Symbolics'
printer software. As for which serial port it hangs off of, we just
have the printer hanging off one of the consoles at 9600 baud (we
don't have it attached to the main unit because that's in another
area). The only problem with the LaserWriter is if you have both Macs
and Symbolics attached to it. The Macs are on Appletalk, and the
Symbolics are attched to the serial port. There is a knob on the back
of the LaserWriter that tells the printer which port (apppletalk or
serial) to pay attention to, so evrytime you want to use a different
machine (that is, a Mac after the Symbolics has just printed, or vice
versa), you have to go over to the printer and change the setting
As to which prom set we're running, I don't know, although it's not
-- John Lawler
John E. Lawler
Arthur Andersen & Co.
Artificial Intelligence Group
33 W. Monroe St.
Chicago, IL 60603 MoneyNet: (312) 507-5353
CSNET : firstname.lastname@example.org
Delphi : JLAWLER
GEnie : J.LAWLER
"I was playing poker with a deck of Tarot cards...I got a full house and four
people died" -- Steven Wright